| |
|
|
|
|
| PUMP
SPARES KITS |
| |
|
|
SP
(Series
100 liquid ends) and RPM (Series 300 liquid ends) spares kits
include all parts that are required for routine preventative
maintenance of LMI Chemical Metering Pumps.
The convenient packaging and liquid end drawing ensure quick and
easy replacement of spares kit parts. |
|
| PUMP
ACCESSORIES |
| |
| Digi-Pulse
Flow Monitors |
|
|
|
Digi-Pulse
Flow Monitors provide the answer to "How Do I Know If My Pump
Is Pumping?"
This innovative product is designed to be used with LMI Type '9'
Metering Pumps to confirm pump output. If the Flow Monitor
detects output loss, it will shut the pump off and activate an alarm
output. |
| |
| Chemical
Dosing Tanks & Bunds |
|
|
A
range of chemical dosing tanks and bunds in chemical resistant MDPE with screw
lids.
Capacities from 50 - 1,000 litres, available in black, natural and
primrose.
Bund Tanks are also available to suit dosing tanks and are
recommended to prevent chemical spillage.
For larger storage requirements, 1,500, 1,800 and 4,500 litre Static
Storage Tanks in black MDPE with hinged lids are available. |
|
| Water
Meters |
|
|
|
Water
meters with pulsed output provide a simple method to feed chemical
in proportion to water flow. Can be used with LMI Metering
Pumps Type '5', '7' or '9', and G Pulse motor driven
pumps.
Hot and cold water versions are available from 1/2" to 6"
with flow rates from
1.5 M3/H to 150 M3/H. |
| Back
Pressure/Pressure Relief Valves |
|
|
|
LMI's
diaphragm back pressure/anti-syphon valves apply positive discharge
pressure to a metering pump system and act to stabilize the output
of higher output LMI Metering Pumps when pumping into low or
no-pressure systems. Pressure relief valves are designed to
protect chemical feed systems from overpressure damage caused by
defective equipment or deadheading. Valves are available in
1/4”, 1/2”, and 1” sizes in PP, PVC, PVDF, and 316SS. |
|
| Pulsation
Dampeners |
|
| |
|
|
For
applications that will not tolerate pulsation, pulsation dampeners
are available in a variety of sizes and material. They will
help remove a high degree of pulsing and surging.
Why Pulsation Dampers?
1. Stops excessive pipe vibration, noise and water
hammer
2. Protects instrumentation
3. Gives continuous flow of product to process
4. Increases pump efficiency
5. Stops cavitation
6. Saves pump wear and tear
7. Reduces pipe fatigue
8. Improves system capacity |
| |
|
Autoprime ™ Degassing
Valve |
|
Designed to be used
with LMI metering pumps with 300 Series liquid ends when pumping
Sodium Hypochlorite or Hydrogen Peroxide. |
|
|
|
|
Allows constant removal of vapours and gases |
|
|
|
Automatically primes pumps |
|
|
|
Air-gap anti-syphon valve |
|
|
|
Pump output regulated - no need for back
pressure device |
| |
|
|
| |
| Four
Function Valve (4FV) |
|
|
|
This
compact and economical valve performs four important functions for
your LMI metering pump:
1. Diaphragm type
anti-syphon
protection
2. Back pressure
3. Priming relief
4. Discharge of delivery time
Priming
with the 4FV is simple and is achieved by a turn of the pressure
relief knob. We highly recommend this accessory for every LMI
metering pump. |
|
| Bleed
Four Function Valve (B4FV) |
| |
|
|
The
Bleed Four Function Valve is designed to be used
with LMI pumps that are handling chemicals that off-gas readily such
as sodium hypochlorite. It allows the gases to escape without
causing the pump to lose prime. The economical B4FV will fit
new or existing LMI pumps; there is no need to replace the entire
head assembly. Constructed of PVDF for durability and
excellent chemical resistance. |
|
| Wall
Mount Bracket |
| |
|
|
This
moulded polypropylene wall mount bracket is rugged and chemically
resistant. Moulded with mounting holes to accept any LMI
electronic pump, installation is quick and easy. All of the
hardware is included to attach the bracket to a stud or block wall
and to mount your LMI pump. |
|
| Agitators |
| |
|
|
LMI
offer a range of both hand and electric agitators.
Electric agitators are available with PE coated shafts, stainless
steel shafts or PVC shafts (For use with calcium hypochlorite and
sodium hypochlorite).
For applications requiring slow speed mixing, 140 RPM geared mixers
are also available. |
|
| Calibration
Cylinders |
|
|
|
Installation
of a calibration cylinder on the suction side of your metering pump
simplifies calibration, and is an excellent way to maintain it's
accuracy and performance.
PVC or polypropylene in sizes from 100 ml to 4,000 ml are available
with top and bottom BSP connections.
|
| |
|
|
|
Automatic
Pinch Valves |
|
|
|
Full
bore - No pressure drop
- No risk of blockage |
|
|
Total
sealing with solid particles present, gas liquids, powders, slurries |
|
|
Leak-free
- absence of glands |
|
|
Protection
of installation - water hammer avoided on opening and closing |
|
|
Available in aluminium,
cast iron and PVC bodies with neoprene, natural or non-toxic rubber
sleeves, pinch valves are suitable for many varied applications,
including: transmission and control of clean liquids, slurries,
viscous liquids, pastes, granules and power.
The valve is closed by applying pressure between the body and the
sleeves.
Usually pressure is applied by air, but can be replaced by water.
|
| |
|
|
|
 |
